Skip to content

0% Financing • Payments as low as $113/mo

SHOP NOW
Support

Garage Fitment Calculator

Enter your garage and vehicle measurements to estimate which M7K safety-lock positions provide enough overhead clearance.

Height-check diagram showing (A) overall vehicle height measured to the roof and (B) lifting-point height measured to the lift pad contact point.

Your Measurements

Measure from the floor to the lowest obstruction, including the ceiling, garage door, tracks, opener, lights or fixtures.
in.
Measure to the highest fixed point, including roof racks, light bars or permanent accessories.
in.
Measure from the floor to the manufacturer-approved lifting point where the lift pad contacts the vehicle.
in.
Additional clearance included in the estimate. This does not replace physical verification.
in.
Select the pad configuration used for the maximum lifting-height estimate.

Safety Lock Results

Safety LockEstimated Pad HeightRaised Vehicle HeightRemaining ClearanceResult
1 — Lowest————Not calculated
2————Not calculated
3————Not calculated
4————Not calculated
5————Not calculated
6————Not calculated
7————Not calculated
8 — Highest————Not calculated

Planning estimate only: Results are based on the measurements entered and estimated safety-lock pad heights. Confirm actual vehicle dimensions, approved lifting points, lift configuration, lock heights and overhead obstructions before installation or operation.